Re: Print-Image Problem

[JBBARTH <JBBARTH@AOL.COM>]

Mark

We did something similar in PO version 5.x and found that the -printer:wp
switch changed all the fonts.  This switch caused the font codes in the SQR to
be interpreted differently.  We had to change all the graphic font statements
to a different font code.  You can find the codes in SQR manual in the
Declare-Printer section.  Notice that there is one table for HP LaserJet
printers(which is what the SQR is set up to use I believe) and one table for
Windows Print Drivers(which is used when you specify the -printer:wp switch).

We also found that we could only print the image from a Windows NT client.
There is a known problem with Win95 clients that has been mentioned on this
list before.

Hope this helps,

Jake Barth
BTRG, Inc.