Re: SQR Duplex Printing/Page problem

[Daniel Archibald <archibal@USQ.EDU.AU>]

Hi

For those of you who may experience this problem in the future.  The
NEW-PAGE function, when used with PCL commands for Duplex Printing, appears
to have been interpreted as a new piece of paper (well for me it was).  To
get around this problem I have replaced the NEW-PAGE command with the PCL
command for use next side.  This appears to be working fine.

Thanks.

Regards,

Daniel Archibald
IBIS Project
University of Southern Queensland
Toowoomba, Australia

-----Original Message-----
From: Daniel Archibald
Sent: Thursday, 22 November 2001 5:28
To: 'SQR-USERS@LIST.IEX.NET'
Subject: SQR Duplex Printing/Page problem


Hi

I am printing to a HP 8100 series LaserJet using the PCL 5e driver.

I am using the PCL commands for duplex printing and tray selection.  When I
print my report it appears that page 1 is being printed really on page 2
(back page of the first piece of paper), and what should be on the back page
of the first piece of paper is being printed on the second piece of paper
(page 3).

When debugging it using #page-count it appears that SQR believes its on page
1 and 2 only during the processing of the report.

I am using:

encode '<27>&l1S' into $duplexon
print $duplexon () code-printer=HPLASERJET


If anyone has any advice on why this maybe occuring I would appreciate your
thoughts.

The environment I am working with is : SQR 4.3.4, PeopleSoft 7.5 and Oracle
8.1.7.0.0


Cheers,

Daniel Archibald
IBIS Project
University of Southern Queensland
Toowoomba, Australia